Fountain Patterns for the Price of One!
Kasco Marine's NEW 3.1JF, 3 hp Floating Aerating
Fountain or Decorative Fountain Aerator is great
for larger ponds or when multiple large patterns
are desired. The Kasco 3.1JF Floating Aerating
Fountain is unique for its size, in that,
it comes standard
with 5 interchangeable nozzles and can be operated
without a nozzle to give you 6 FOUNTAIN PATTERNS
FOR THE PRICE OF ONE!
The 6 fountain patterns
range from 24' in height to over 45' in diameter.
6 multiple fountain patterns, you have the freedom
to adjust the aerating fountain to fit your pond,
weather conditions, and your tastes. Kasco's
3.1JF Floating Aerating Fountain does a great job
adding oxygen and improving your pond or
The 3.1JF Floating Aerating Fountain is available
in a 240V, 60Hz model. Click
here to download a NEW Kasco "J" Series
Floating Aerating Fountain brochure.
a LR-375 Low Voltage Light Kit to the 3.1JF Floating Aerating Fountain
adds a touch of class to this beautiful fountain
display during the nighttime hours. The LR-375
Low Voltage Light Kit includes three machined,
bronze, light fixtures with 75 Watt MR-16 Halogen
bulbs in each fixture. The LR-375 Low Voltage Light
Kit's transformer is built into the light kit itself,
so all you have to do is plug it into the C-85
Control Panel. Three clear MR-16 bulbs are included
with each LR-375 Low Voltage Light Kit, however,
you can chose any or all of the optional colors
of Red, Green, Blue, & Yellow.
The 3.1JF, 240V Floating Aerating Fountain also
includes a GFCB protected control panel.
The C-85, 240V Control
Panel with Timer, GFCB protection, 120V GFI Protected
Outlet for Lights, and Photo Eye for light operation
comes standard with the 3.1JF Floating Aerating
Fountain. Kasco recommends a licensed electrician
the C-85 Control Panel and the 3.1JF if you plan
to hard-wire the Floating Aerating Fountain into
the C-85 Control Panel.
3.1JF Floating Aerating Fountain also has a NEW
float design. This new float has a lower profile
while sitting in the water and also has a new,
non-circular shape. Each 3.1JF Floating Aerating
Fountain is now shipped with this new float. All
the hardware is the same as used with the previous
The 3.1JF Floating Aerating Fountain model includes
the following staples of all Kasco Floating Fountains,
Pond Aerators, or Water Circulators:
top and bottom ball bearings
• Environmentally friendly oil-filled motor with a
hard-face internal mechanical seal and external lip
seal for protection against leaks.
• Flood oil lubricated for excellent heat dissipation.
• Highly efficient, lower power consumption than competitive
• Superior dependability in salt-water or other corrosive
environments. All external metal motor, float, and
hardware components are of stainless steel composition
and protected by a sacrificial zinc anode.
• Requires minimal maintenance. We recommend cleaning
the stainless steel motor housing once or twice per
year and replacing the sacrificial zinc anode when
• ETL listed to stringent UL and CSA Safety Standards
• U.P.S. Shippable
• Made with pride in the U.S.A.
Along with the staples of all Kasco Floating Fountains,
Pond Aerators, and Water Circulators, the 3.1JF Floating
Aerating Fountain boasts the following UNIQUE CHARACTERISTICS:
• Kasco's unique water-deflecting nozzle design gives
you the most clog-resistant model on the market.
• Silicon carbide mechanical seals for greater life
• Two year manufacturer's limited warranty
• Impeller technology giving the unit breathtaking
patterns and high water flow for full fountain patterns
• Successful shallow water operation in as little as
• 13.4 running amps on a 240V circuit for low operating
• SJTOW underwater rated power cord length options
of 50', 100', 150', 200', or 250'
• Includes three 50' braided nylon mooring ropes
• 3.1JF ships in 4 or 5 boxes via UPS (add 1 box for
• 5 interchangeable nozzles to give you 6 fountain
patterns (6th pattern running without nozzle) for
the price of one!
• New Nozzle Design for Increased Pattern Diameter
and Ease of Use!