Rain Bird 2045A Maxi-Paw™
/ 2045A-SAM
Full- or Part-Circle Impact Rotor Pop-Up Sprinklers
Primary Application
The Maxi-Paw's
powerful throw permits maximum spacing and offers superior
close-in watering and uniform water distribution. Low
pressure loss and an efficient, straight-through flow
design conserve energy and are ideal for dirty water applications.
The optional Seal-A-Matic™ prevents run-off, puddling,
and erosion caused by low head drainage. And most important,
it's rugged and dependable, popping up on schedule again
and again because of the multi-function wiper seal. The
Maxi-Paw Rotor- a tradition of excellence.
Maxi-Paw
Features
- Proven
impact drive.
- Straight-through
flow for superior performance in dirty water.
- Five
interchangeable, color-coded MPR nozzles with standard
trajectory.
- Two interchangeable
low angle (LA) nozzles.
- Easy
to adjust, easy to service.
- No tools
required to change nozzles.
- Heavy-duty
plastic case with sturdy, reinforced ribbed design.
- Double-weighted
arm for slower rotation and increased distance of throw.
- Self-flushing
inner trip with improved inner trip lever.
- Powerful
reverse action.
- Adjustable
arm spring for low-pressure and low-gallonage operation.
- Energy
efficient, low pressure and low-gallonage operation.
- Proven
impact drive.
- Straight-through
flow..
- Full-circle
or part-circle arc 20° to 340°.
- Precision
Jet tube (PJ™) minimizes side splash.
- Hooded
bearing for longer life.
- Distance
control diffuser pin.
- Multi-function,
pressure-activated wiper seal.
- Inlet
filter screen and pressure-activated wiper seal protect
internal assembly from debris to ensure positive pop-up
and retraction.
- Combination
1/2" (15/21) or 3/4" (20/27) bottom inlet.
- Heavy-duty,
stainless steel retract spring assures positive sprinkler
pop-down.
- FP trip
for full- or part-circle operation.
- Side
or combination bottom inlet for design flexibility.
- Serviceable
through the top of the case.
- Optional
internal Seal-A-Matic (SAM) prevents puddling and erosion
caused by low head drainage and saves water.
Operating
Range
- Precipitation
Rate: 0.28 to 1.17 inches per hour (7 to 30 mm/h)
- Radius:
22 to 45 feet (6,7 to 13,7 m)
- Radius
with Radius Reduction Screw: 18 ft (5,4 m)
- Pressure:
25 to 60 psi (1,7 to 4,1 Bars)
- Flow:
1.5 to 8.4 GPM (0,34 to 1,91 m3/h; 0,9 to
0,53 l/s)
Specifications
- Combination
1/2" (15/21) or 3/4" (20/27) FPT bottom inlet
- 1/2"
(15/21) FPT side inlet
- Nozzles:
06-red; 07-black; 08-blue; 10-yellow; 12-beige
- Low angle
(LA) nozzles: 07 LA-black; 10 LA-yellow
- Nozzle
outlet trajectory is 23° for 06, 07, 08, 10, and 12
nozzles.
- LA nozzle
outlet trajectory is 11°.
- Side
inlet installation is not recommended in freezing climates.
Dimensions
- Overall
height: 9/10" (23,6 cm)
- Pop-up
height: 3" (7,6 cm)
- Exposed
surface diameter: 5" (12,7 cm)
Model
Available
Nozzles
- Standard
trajectory
- 06, 07,
08, 10, 12
- Low Angle
- 07LA,
10LA
Nozzle
Performance Charts
To
use the charts below:
-
Using
the pressure column, locate the pressure your sprinkler
head will be a exposed to (the pressure at the head).
-
Next,
look at the radius column within the pressure section
you identified above, and choose the distance you
want the water to go (remember that the distance published
are the max distances under perfect conditions with
the stars lined up just right, so assume the published
distances are about 5 feet more than then really cover).
-
Now
you will be able to determine which nozzle to use
to get the distance you want at the pressure your
sprinkler head pressure.
-
You
can also see how much water each sprinkler head will
use at a given pressure using a selected nozzle, so
you can determine the gallons per minute a zone will
use.
An
example is that if I know my pressure at the head will
be about 45 psi, and I want the water throw to be about
36 feet, I will need to use a # 8, nozzle (since you know
the sprinkler will not really throw 40 feet using a #
8 nozzle...remember place it safe and do not space the
heads too far apart).
2045A
Maxi-PawTM
Performance Chart
|
|
|
|
|
 |
 |
| |
|
|
|
|
|
|
Pressure
psi |
|
Nozzle
|
Radius
ft. |
Flow
GPM |
Precip
In/h |
Precip
In/h |
| |
|
|
|
|
|
|
| 25 |
|
6 |
- |
- |
- |
- |
|
|
07
LA |
22 |
1.50 |
0.60 |
0.69 |
|
|
7 |
32 |
2.20 |
0.41 |
0.48 |
|
|
8 |
35 |
2.80 |
0.44 |
0.51 |
|
|
10
LA |
25 |
3.40 |
1.05 |
1.21 |
|
|
10 |
38 |
4.20 |
0.56 |
0.65 |
|
|
12 |
39 |
5.50 |
0.70 |
0.80 |
| |
|
|
|
|
|
|
| 35 |
|
6 |
37 |
2.00 |
0.28 |
0.32 |
|
|
07
LA |
23 |
1.90 |
0.69 |
0.80 |
|
|
7 |
37 |
2.70 |
0.38 |
0.44 |
|
|
8 |
38 |
3.30 |
0.44 |
0.51 |
|
|
10
LA |
29 |
4.00 |
0.92 |
1.06 |
|
|
10 |
41 |
4.80 |
0.55 |
0.64 |
|
|
12 |
42 |
6.30 |
0.69 |
0.79 |
| |
|
|
|
|
|
|
| 45 |
|
6 |
38 |
2.30 |
0.31 |
0.35 |
|
|
07
LA |
25 |
2.10 |
0.65 |
0.75 |
|
|
7 |
39 |
3.00 |
0.38 |
0.44 |
|
|
8 |
40 |
3.70 |
0.45 |
0.51 |
|
|
10
LA |
31 |
4.50 |
0.9 |
1.04 |
|
|
10 |
42 |
5.40 |
0.59 |
0.68 |
|
|
12 |
44 |
7.10 |
0.71 |
0.82 |
| |
|
|
|
|
|
|
| 55 |
|
6 |
38 |
2.50 |
0.33 |
0.39 |
|
|
07
LA |
25 |
2.30 |
0.71 |
0.82 |
|
|
7 |
41 |
3.30 |
0.38 |
0.44 |
|
|
8 |
41 |
4.10 |
0.47 |
0.54 |
|
|
10
LA |
32 |
5.00 |
0.94 |
1.09 |
|
|
10 |
43 |
6.00 |
0.62 |
0.72 |
|
|
12 |
45 |
7.90 |
0.75 |
0.87 |
| |
|
|
|
|
|
|
| 60 |
|
6 |
38 |
2.60 |
0.35 |
0.40 |
|
|
07
LA |
25 |
2.40 |
0.74 |
0.85 |
|
|
7 |
41 |
3.50 |
0.40 |
0.46 |
|
|
8 |
42 |
4.20 |
0.46 |
0.53 |
|
|
10
LA |
32 |
5.40 |
1.02 |
1.17 |
|
|
10 |
44 |
6.40 |
0.64 |
0.74 |
|
|
12 |
45 |
8.40 |
0.80 |
0.92 |
Precipitation
Rates based on half-circle operation.
 |
Square
spacing based on 50% diameter of throw. |
 |
Triangular
spacing based on 50% diameter of throw. |
| Performance
data collected in zero wind conditions |
|
Click
here to view pricing or to place an order
|
